LED Drivers
  • SC653
    • Charge Pump LED Driver for 4BL + 2LDO + SemPulse Interface
  • SC657
    • Charge Pump LED Driver for 5BL + SemPulse Interface
  • SC658
    • Charge Pump LED Driver for 4BL + SemPulse Interface
  • SC656
    • Charge Pump LED Driver for 7BL + Dual PWM Interfaces
  • SC446
    • High Efficiency Integrated Driver for 3-Strings of 100mA LEDs
  • SC441C
    • High Efficiency Integrated Driver for 4-Strings of 150mA LEDs
  • SC561
    • Dual Output Low Noise LDO Linear Regulator
  • SC810
    • Single Input/Single Mode Single-cell Li-ion Battery Charger
  • SCDAS4F
    • Standard Recovery, High Current Center Tap and Doubler Rectifier Assemblies
Semtech SC606

Semtech SC606

Charge Pump LED Driver for 6BL + Limited I2C Interface

The SC606 is a very high efficiency charge pump white/color LED driver from the mAhXLife™ family of products. It is optimized for Li-Ion battery applications. The LED current is regulated to a value configured by the user through an I2C compatible serial interface.

Features


  • Very high efficiency over 90% of battery life
  • Current regulation for 6 LEDs
  • Current matching tolerance of ± 3.5% from LED to LED
  • Current is accurate to ± 6.5% of the specified value
  • Wide current range per LED [0.5mA - 32mA]
  • High available total LED current = 6*ILED = 120 mA
  • I2C bus limited compatibility
  • Low shutdown current: 0.1 µA typical
  • Soft start / inrush current limiting
  • Short-circuit / thermal protection
  • 1.33 MHz and 250 kHz programmable fixed frequency
  • Separate brightness zones for multiple displays
  • Three charge pump modes of operation: 1x, 1.5x and 2x
  • Open LED output protection
  • MLP-16 [4x4] package

Applications


  • Cellular phones
  • LED backlighting
  • PDA power supplies
  • Portable electronics
  • Electronic books
  • Handheld computers
  • Wireless web appliances

Packaging

MLPQ-16 (4X4 mm)

Order Codes

  • SC606AIMLTRT: Lead-Free, RoHS and WEEE Compliant, Package Minimum Tape & Reel Only